The inspection rules of the roll crusher and factory inspection

1, Each roll crusher subject to quality inspection department according to this standard factory inspection project inspection qualified rear can leave the factory. And shall be accompanied by a certificate of qualified products.

2. The roller crusher is suitable for processing raw materials such as clay, shale, coal gangue and mine tailings.Due to smooth surface roller roller, thus the minimum clearance between the two rollers can be adjusted to 0.4 mm, so finely to roller machine generally refers to the roll gap of 0.4 ~ 1.5 mm roller materials finely equipment.Finely materials due to the material particle size,

The roller crusher is suitable for processing raw materials such as clay, shale, coal gangue and mine tailings.Due to smooth surface roller roller, thus the minimum clearance between the two rollers can be adjusted to 0.4 mm, so finely to roller machine generally refers to the roll gap of 0.4 ~ 1.5 mm roller crusher materials finely equipment. Finely materials due to the material particle size,

3.The minimum distance between two roller crushers is discharging mouth width, crushing material, the largest size is determined by the discharging mouth width of the roller crusher.

4, Electric cabinet pressure test for sampling project . Type test: one of the following circumstances, it shall conduct pilot test: the new product trial production; Turn the old products factory production. Have a great improve product structure, material, process, that may affect product performance; When to resume production after long-term production; The state administration of quality supervision institution is a request for type test. Pattern examination content should include all requirements of this standard, type test should be the qualified product storage of an inspection, inspection of if not qualified, should re-examine double sampling, such as review of qualified, was sentenced to this batch of qualified products.

The roller crusher is mainly composed of roller crusher wheel, chassis parts, pressure and adjusting device and a transmission device and other parts.By two motor drive, through the chain transmission to the groove on the drag two roller wheels relative rotation movement to the roller crusher broken material.Our roller crusher equipment is adopts the brand motor which has high performance ,  so , inspection can make the roller crusher  use special steel, improve the service life of equipment, enhanced the working efficiency of the equipment.