 Tel: 0086-371-64360588 Fax: 0086-371-64398985 Cell: 0086-15639269289 Whatsapp:0086-185 3819 7529 Viber:0086-185 3819 7529 Sales: Manager: Mr. Zhang Skype: ztbrickmachine Email: sales@ztbrickmachine.com |
The investment amount of brick machine production line depends on the capacity .That is, the larger capacity you want, the bigger machines you need. If you don’t choose a reasonable production line, or the configuration is not good, then it will cost the resource. Below are some notes for you to choose a nice configuration of brick machine production line:
1. If the raw materials are loose materials, for example, clay, only one roller crusher will be enough, you don’t need to get a double stage crusher, which is suitable for hard materials ,like shale, fly ash..etc.
2. Choose the suitable setting equipment. If the capacity is large, and you need to save labor, then auto brick setting machine or brick separator will be a wise choice. If the capacity is small, auto board bearer will be ok.
3. Increase or reduce equipment as per the actual situation. If raw materials are rich, then reduce the box feeder, the materials will be transport to crusher through belt conveyor directly. Or replace the box feeder with roller screen.
4. Choose the drying and burning equipment as per the size of kiln room .When building rail way, the kiln car can be replaced with chart.
In brief, the configuration of brick production line should be oriented to rational use of resources, to get maximum profit. At the same time, we should also pay attention to the labor, environment…etc.
1. If the raw materials are loose materials, for example, clay, only one roller crusher will be enough, you don’t need to get a double stage crusher, which is suitable for hard materials ,like shale, fly ash..etc.
2. Choose the suitable setting equipment. If the capacity is large, and you need to save labor, then auto brick setting machine or brick separator will be a wise choice. If the capacity is small, auto board bearer will be ok.
3. Increase or reduce equipment as per the actual situation. If raw materials are rich, then reduce the box feeder, the materials will be transport to crusher through belt conveyor directly. Or replace the box feeder with roller screen.
4. Choose the drying and burning equipment as per the size of kiln room .When building rail way, the kiln car can be replaced with chart.
In brief, the configuration of brick production line should be oriented to rational use of resources, to get maximum profit. At the same time, we should also pay attention to the labor, environment…etc.
