 Tel: 0086-371-64360588 Fax: 0086-371-64398985 Cell: 0086-15639269289 Whatsapp:0086-185 3819 7529 Viber:0086-185 3819 7529 Sales: Manager: Mr. Zhang Skype: ztbrickmachine Email: sales@ztbrickmachine.com |
Important of Shale Vacuum Brick Machine Material Proportioning
Nowsdays many brick factories adopt automation brick equipment. It can not only has high yield, but also save labor costs. Shale vacuum brick machine is indispensable.
The quality of raw material in some brick factory is not high, leading to bad quality of billets. So raw materials ratio is quite important in the process of brick production.
Ratio of raw materials can not to be too soft nor too hard, it must be appropriate ratio. If the previous raw material is too hard, the left material is too soft, this will lead to hard material store in two steel reamer, and hard to push out.
But the pressure plate continuous to transport raw materials to vacuum chamber at the same time. Then the vacuum indoor will store raw materials.
In some brick factory, the adobe is easily collapse when drying in tunnel kiln, There are multiple reasons.
1. the design of drying way in tunnel kiln
2. Extrusion pressure is not enough in vacuum brick machine.
3. Problem of raw materials ratio.
Take raw materials ratio for example. Improper proportion of raw materials will also cause a collapse of billet.
Ratio of material and quality is quite important, it involves to the beauty and quality of bricks. It needs experienced worker in the process of material proportioning.
Nowsdays many brick factories adopt automation brick equipment. It can not only has high yield, but also save labor costs. Shale vacuum brick machine is indispensable.
The quality of raw material in some brick factory is not high, leading to bad quality of billets. So raw materials ratio is quite important in the process of brick production.
Ratio of raw materials can not to be too soft nor too hard, it must be appropriate ratio. If the previous raw material is too hard, the left material is too soft, this will lead to hard material store in two steel reamer, and hard to push out.
But the pressure plate continuous to transport raw materials to vacuum chamber at the same time. Then the vacuum indoor will store raw materials.
In some brick factory, the adobe is easily collapse when drying in tunnel kiln, There are multiple reasons.
1. the design of drying way in tunnel kiln
2. Extrusion pressure is not enough in vacuum brick machine.
3. Problem of raw materials ratio.
Take raw materials ratio for example. Improper proportion of raw materials will also cause a collapse of billet.
Ratio of material and quality is quite important, it involves to the beauty and quality of bricks. It needs experienced worker in the process of material proportioning.
