 Tel: 0086-371-64360588 Fax: 0086-371-64398985 Cell: 0086-15639269289 Whatsapp:0086-185 3819 7529 Viber:0086-185 3819 7529 Sales: Manager: Mr. Zhang Skype: ztbrickmachine Email: sales@ztbrickmachine.com |
Using Requirements for Vacuum Brick Machine
What are the using requirements for vacuum brick machine?
1, independent operation is not allowed without practice .
2, necessary for the operator without exception, electrical, hydraulic principle device, equipment, commissioning, operation, maintenance, repair, deepen know there, and by now exercises , specially check, confessed their talents can hold this position.
3, to ensure the normal operation of the electrical system, it is necessary to adhere to a stable voltage, and its value should not exceed shake or less than 5-10% of the rated voltage.
4, electrical cabinets, junction boxes, console door or lid is necessary when the machine is turned off , not allowed to use open,.
5, when the vacuum brick appears disadvantage (such as actions are not normal, unstable oil pressure, oil pressure is too low, the system vibration, oil temperature rises too fast, etc.), you should promptly analyze the reasons, eliminate shortcomings,and allow the machine to constitute a major event.
6, you should often see and observe the tightening fittings to prevent oil spills from loosing.
7, the operator of the hydraulic components are not allowed to secretly replace, when there is disadvantage, equipment repair by skilled personnel in a timely manner to eliminate disadvantages of the equipment for repair.
What are the using requirements for vacuum brick machine?
1, independent operation is not allowed without practice .
2, necessary for the operator without exception, electrical, hydraulic principle device, equipment, commissioning, operation, maintenance, repair, deepen know there, and by now exercises , specially check, confessed their talents can hold this position.
3, to ensure the normal operation of the electrical system, it is necessary to adhere to a stable voltage, and its value should not exceed shake or less than 5-10% of the rated voltage.
4, electrical cabinets, junction boxes, console door or lid is necessary when the machine is turned off , not allowed to use open,.
5, when the vacuum brick appears disadvantage (such as actions are not normal, unstable oil pressure, oil pressure is too low, the system vibration, oil temperature rises too fast, etc.), you should promptly analyze the reasons, eliminate shortcomings,and allow the machine to constitute a major event.
6, you should often see and observe the tightening fittings to prevent oil spills from loosing.
7, the operator of the hydraulic components are not allowed to secretly replace, when there is disadvantage, equipment repair by skilled personnel in a timely manner to eliminate disadvantages of the equipment for repair.
