 Tel: 0086-371-64360588 Fax: 0086-371-64398985 Cell: 0086-15639269289 Whatsapp:0086-185 3819 7529 Viber:0086-185 3819 7529 Sales: Manager: Mr. Zhang Skype: ztbrickmachine Email: sales@ztbrickmachine.com |
Features of Double Stage Crusher
Double stage crusher is used to crush raw material like slay, coal gangue etc. And it has no strict rule to the moisture content of the raw materials, so it is an ideal crushing equipment for many factories. Double stage crusher has many features.
First, double rotors, upper and lower, double stage grinder.
The two sets of rotors connected with each other, so that the material crush by the superior rotor will be crush again by the rapid rotation of the lower rotor hammer. The cavity material collide with each other, crush each other to achieve hammer powder material powder effect .
Second, no screen, no grate, high-humidity materials never plug.
The traditional grinder with grate plate, not suitable for moisture content of more than 8% raw materials, when the moisture content of raw materials is higher than 10%, it is prone to serious congestion, so that the hammer can not rotate, the material can not be discharged, or even burn the motor, and seriously affect the production.
No screen, no grate will ensure the high-hard materials, high moisture material no plug, feed water content can reach 100%, water content of 90% fineness all below 2 MM (mm) or 1MM (mm). Even rainy days can produce as usual.
The design of this machine has no mesh grate, so it is no strict require to the moisture content of the material , there is no paste blocking sieve plate problem, there is no fine powder can not be discharged in time, repeat the crushing problem, so the high efficiency, there is no hammer Invalid wear phenomenon.
Third, the two rotors, two crushing, so the production is big, the material size can below 3 mm, more than 80% can below 2 mm.
Fourth, wear-resistant combination hammer. High-alloy wear-resistant hammer. Hammer and hammer handle use combines together, only replace the hammer.
Fifth, unique shift-gap technology. No need to repair hammer when wear, it can be repeat use when move a position, a hammer can equal three hammers.
Double stage crusher is used to crush raw material like slay, coal gangue etc. And it has no strict rule to the moisture content of the raw materials, so it is an ideal crushing equipment for many factories. Double stage crusher has many features.
First, double rotors, upper and lower, double stage grinder.
The two sets of rotors connected with each other, so that the material crush by the superior rotor will be crush again by the rapid rotation of the lower rotor hammer. The cavity material collide with each other, crush each other to achieve hammer powder material powder effect .
Second, no screen, no grate, high-humidity materials never plug.
The traditional grinder with grate plate, not suitable for moisture content of more than 8% raw materials, when the moisture content of raw materials is higher than 10%, it is prone to serious congestion, so that the hammer can not rotate, the material can not be discharged, or even burn the motor, and seriously affect the production.
No screen, no grate will ensure the high-hard materials, high moisture material no plug, feed water content can reach 100%, water content of 90% fineness all below 2 MM (mm) or 1MM (mm). Even rainy days can produce as usual.
The design of this machine has no mesh grate, so it is no strict require to the moisture content of the material , there is no paste blocking sieve plate problem, there is no fine powder can not be discharged in time, repeat the crushing problem, so the high efficiency, there is no hammer Invalid wear phenomenon.
Third, the two rotors, two crushing, so the production is big, the material size can below 3 mm, more than 80% can below 2 mm.
Fourth, wear-resistant combination hammer. High-alloy wear-resistant hammer. Hammer and hammer handle use combines together, only replace the hammer.
Fifth, unique shift-gap technology. No need to repair hammer when wear, it can be repeat use when move a position, a hammer can equal three hammers.
