Description of JZK55 auto brick machine
 

Features of JZK55 auto brick machine
 

1.This auto brick  machine adopts the design of the strong combine,

2. the principle axis bearings of the extrusion system and the mud vacuum chamber are connected for integral whole, which aims to keep the coaxially of the main shaft. 

3.Thus, the extrusion will be uniform with strong extruding pressure and small wave motion.

4. In addition, it also adopts the design of flexible top and bottom combinative form.

5.The top side is used to compress the mire in advance to guarantee high vacuum degree, thus, the brick will be more dense and solid.

6.It's applicable to make all kinds of hollow bricks with raw material of coal gangue, shale, fly ashes and clay.
 

More details of JZK55 auto brick machine
 

1 .Made of carbon steel and alloy steel,good quality.

2 .Heat treament,welding stress eliminated,large extrusion pressure.

3 . low energy consumption, high output, easy maintenance

4 .The main parts of machine,such as the main axle,gear and vacuum chamber, have passed the aging,quenching and tempering process;

5 .Punch motion adopts the hinged plunger structure.

6 .The speed reducer gears are all the hard tooth surface;more wear-resisting.

7.The cluch is penumatic driving,uses the screw compressor patent technology,greatly improve the working life of equipment.

8.At the same time,this machine has rational design,compact structure,smooth operation,can greatly reduce the consumption power by vibration in equipment operation process.

9.Optimized cam work surface outline design.The advanced process technics for making so as to  reduce the work noise,also has the features of high speed,less impact and good continuity.
 

Brief steps of making bricks by auto brick machine
 

1. Brick raw materials should be prepared. Such as clay, fly ash, coal gangue, shale and so on.

2. Brick factory should be built. The yard of brick plant should be in agreement with the productivity of bricks.

3. The size of bricks should be in agreement with the local standard.

4. The model of bricks should be choosed, solid brick or hollow brick, If is hollow brick, how many holes on the brick.

5. The kiln for drying and firing bricks should be arranged, the tunnel kiln, annular kiln with dry hole or annular kiln.