 Tel: 0086-371-64360588 Fax: 0086-371-64398985 Cell: 0086-15639269289 Whatsapp:0086-185 3819 7529 Viber:0086-185 3819 7529 Sales: Manager: Mr. Zhang Skype: ztbrickmachine Email: sales@ztbrickmachine.com |
Vacuum Extruder JZK60, New Product Manufactured by Zheng Tai
Introduction:
Adopting domestic latest technology and recreating with innovation, Zhengtai Factory manufactured a high-performance
brick machine--Vacuun Extruder JZK60. This machine uses different materials like pure gangue,
pure shale, coal ash, clay and so on to produce various bricks such as common brick, blind hole brick and hollow
brick of different types. It is an ideal equipment with the capacity of more than 60 million common bricks per year.
The vacuum extruder is made of high grade steel and the welding stress is also eliminated by heat treatment,
thus it has the following features: rational construction, strong adaptability, big extrusion pressure, low energy consumption,
high output, easy maintenance, etc. Applicable materials are widespread, shale, gangue, fly ash, and industrial tailings,
all can be used as raw materials. The material mixing blade is designed and adopted according to the
different raw materials, and the wear-resistant lining plate is also adopted inside the mixing tank.
The shafts used inside the machine are special ones which are harden by quenching.
Hard tooth gear surface is adopted in the reducer. The vacuum extruder JZK60 is a good substitute
of traditional brick machines with person-control reamer shaft and steady suspended steamer of high Cr,
which extends its service life.
Our vacuum extruder has many types, JZK60, JZK50, JZK45, JZK40, JZK35, JZK30, and you won't fail to find the right products.
Brick making production line: tank type feeder, brick machine DW, roll crusher, double shaft mixer, belt conveyor,
vertical slitter(adjustable), auto adobe cutter.
Working process: material dosing, mixing, rolling/pressing, further mixing(adding steam), air exhaust,
further pressing, brick cutting, firing.
Performance:
Adopting domestic latest technology and recreating with innovation, Zhengtai Factory manufactured a high-performance
brick machine--Vacuun Extruder JZK60. This machine uses different materials like pure gangue,
pure shale, coal ash, clay and so on to produce various bricks such as common brick, blind hole brick and hollow
brick of different types. It is an ideal equipment with the capacity of more than 60 million common bricks per year.
The vacuum extruder is made of high grade steel and the welding stress is also eliminated by heat treatment,
thus it has the following features: rational construction, strong adaptability, big extrusion pressure, low energy consumption,
high output, easy maintenance, etc. Applicable materials are widespread, shale, gangue, fly ash, and industrial tailings,
all can be used as raw materials. The material mixing blade is designed and adopted according to the
different raw materials, and the wear-resistant lining plate is also adopted inside the mixing tank.
The shafts used inside the machine are special ones which are harden by quenching.
Hard tooth gear surface is adopted in the reducer. The vacuum extruder JZK60 is a good substitute
of traditional brick machines with person-control reamer shaft and steady suspended steamer of high Cr,
which extends its service life.
Our vacuum extruder has many types, JZK60, JZK50, JZK45, JZK40, JZK35, JZK30, and you won't fail to find the right products.
Brick making production line: tank type feeder, brick machine DW, roll crusher, double shaft mixer, belt conveyor,
vertical slitter(adjustable), auto adobe cutter.
Working process: material dosing, mixing, rolling/pressing, further mixing(adding steam), air exhaust,
further pressing, brick cutting, firing.
Performance:
|
Model
|
Capacity
|
Moisture
Content |
Reamer
Diameter |
Speed of
Mainshaft |
Power
|
Dimension
|
|---|---|---|---|---|---|---|
|
JZK60-60-4.0
|
18000-24000
pieces/hour |
14-18%
|
600-600mm
|
23-25
(r/min) |
Mixing Part:Y250M-4-90KW
|
7500×3800×2580
|
|
Extruding Part:Y315S-6-180KW
|
