Choose suitable vacuum pump for brick machine

The old type brick machine is matched with high power vacuum pump, which will cause serious energy waste.Due to the poor seal, usually the brick machine with 450mm reamer will be matched with 22 kw vacuum pump.And hollow brick machine often can not reach the requirements.

In the recent years, some brick vendors have made some improvements on the vacuum system of sealing parts. And there are also some enhancements on the vacuum pump performance. Now the brick machine with 500mm reamer,or even larger brick machine will be matched with 5.5kw vacuum pump.The high vacuum situation can be kept for a long time.

The spiral reamer is of optimization design. Since it's the core component of brick machine ,so the quality of spiral reamer plays a decisive role on the performace of brick machine.As long as there is some improvement on the helical cutter parts, the power consumption of brick machine will be dropped20%-30% , and the capacity per shift will be increased by 20%-30%. The power saving effect is amazing.